Nagios报Error: Could not read object configuration data!解决方法

admin

Nagios报Error: Could not read object configuration data!解决方法

Error: Could not read object configuration data!

Here are some things you should check in order to resolve this error:

! K1 O8 X1 n: b! I! j, M0 @

Verify configuration options using the -v command-line option to check for errors.

Check the Nagios log file for messages relating to startup or status data errors.

( ?7 l3 B1 S. U0 t$ c9 o5 {: x. T! g

Make sure you've compiled the main program and the CGIs to use the same object data storage options (i.e. default text file or template-based file).

Make sure you read the documentation on installing, configuring and running Nagios thoroughly before continuing. If all else fails, try sending a message to one of the mailing lists. More information can be found at http:[url=http://www.nagios.org][/url][url=http://www.nagios.org][/url][url=http://www.nagios.org][url=http://www.nagios.org][/url][/url][url=http://www.nagios.org][/url][url=][url=http://www.nagios.org][/url][/url][url=http://www.nagios.org][url=http://www.nagios.org][url=http://www.nagios.org][url=http://www.nagios.org]//www.nagios.org[/url][/url][/url][/url].
0 H. @" o, q1 W3 \
! I7 w  f- c0 \+ W0 D# ]$ `
检查发现没有启动nagios的后台服务导致：
解决办法：
/usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg
" h4 K2 \7 R0 O0 {+ J9 asystemctl start nagios
systemctl status nagios
+ B8 b" G# A- E


6 v( [* p* R% v2 x7 d! L
登录界面，问题解决：

4 K% L2 N7 G& B# e8 W( L